FIT Fast Charger
FIT Fast Charger
Available
Available
Product number:
500402
€213.00*
A 460 Wh battery is charged in just under four hours. Ideal for e-bikes that are used frequently or have to be ready for use again quickly. Charging possible on and off the e-bike.
- Compatible with all FIT 2.0 batteries 48 V
- Intelligent charger with CAN communication
- Monitors battery status throughout the entire charging process and ensures greater safety
- Autonomous switch-off after full charge
- Regulates the charging current depending on the condition of the cells to prevent overheating and damage to the cells
- Fast charging with 4.8 A charging current
- Incl. power cable
- Status indicator by LED
Generate datasheet
| Charging time (in h) for 460 Wh battery: | 2.9 |
|---|---|
| Charging time (in h) for 700 Wh battery: | 4.3 |
| Charging time (in h) for 920 Wh battery: | 5.3 |
| Material: | Plastic |
| Output at 48V in A: | 4.8 |
| Upgrade option: | No |
| System: | FIT 2.0 |
| System voltage in V: | 48 |
| Input (in Hz) at 230 - 240V: | 50 - 60 |
| Material colour: | black |
| End-of-charge voltage in V: | 54.6 |
| Weight: | 0.77 kg |
| Length: | 193.4 mm |
| Width: | 94.75 mm |
| Height: | 57.2 mm |
| Scope of delivery: | 1x FIT Fast Charger, including power cable |
- According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, chargers that are no longer usable have to be collected separately and recycled in an environmentally sound way.
- Keep the charger away from rain or moisture. If water enters the charger, there is a risk of electric shock.
- Protection class II equipment has a reinforced or double insulation between the mains circuit and the output voltage or metal housing (VDE 0100 Part 410, 412.1) and usually has no connection to the protective conductor. This protective measure is also known as protective insulation II (safe electronic isolation)
- Do not replace connectors, as this may result in a risk of fire or electric shock.