FIT Fast Charger
FIT Fast Charger
Available
Available
Product number:
500074
€213.00*
Alternatively, item no. 500951 can be combined with item no. 501342, giving the same performance as the FIT Fast Charger.
The FIT Fast Charger is the fastest FIT charger. A 500 Wh battery is charged in just under three hours. Ideal for e-bikes that are used frequently or have to be ready for use again quickly.
- Battery charging on and off the e-bike
- Compatible with all FIT 2.0 batteries 36 V
- Status indicator by LED
- Automatic cut-off after full charge
- Incl. power cable
Generate datasheet
| Charging time (in h) for 500 Wh battery: | 2.3 |
|---|---|
| Material: | Plastic |
| Product number FLYER: | 164773 |
| Upgrade option: | No |
| System: | FIT 2.0 |
| System voltage in volts: | 36 |
| Input (in Hz) at 230 - 240V: | 50 - 60 |
| Charging time (in h) for 630 Wh battery: | 2.9 |
| Charging time (in h) for 750Wh battery: | 3.5 |
| Material colour: | black |
| Output at 36 V in amperes: | 6 |
| End-of-charge voltage in V: | 42 |
| Weight: | 0.77 kg |
| Length: | 193.4 mm |
| Width: | 94.75 mm |
| Height: | 57.2 mm |
| Scope of delivery: | 1x FIT Fast Charger, includes power cable |
- Please read all of the safety instructions and regulations. Non-compliance with the safety instructions and regulations may lead to electric shock, fire and/or severe injuries.
- According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, chargers that are no longer usable have to be collected separately and recycled in an environmentally sound way.
- Keep the charger away from rain or moisture. If water enters the charger, there is a risk of electric shock.
- Protection class II equipment has a reinforced or double insulation between the mains circuit and the output voltage or metal housing (VDE 0100 Part 410, 412.1) and usually has no connection to the protective conductor. This protective measure is also known as protective insulation II (safe electronic isolation)
- Do not replace connectors, as this may result in a risk of fire or electric shock.