FIT Standard Charger
FIT Standard Charger
This item is currently unavailable
This item is currently unavailable
Product number:
500950
€192.00*
The FIT Standard Charger 48V is the ideal charger for everyday use. For more charging power, the FIT Standard Charger can be upgraded from 3 A to 4.8 A.
Charging possible on and off the e-bike.
- Compatible with all FIT 2.0 batteries 48 V
- Intelligent charger with CAN communication
- Monitors battery status throughout the entire charging process and ensures greater safety
-
Autonomous switch-off after full charge
- Regulates the charging current depending on the condition of the cells to prevent overheating and damage to the cells
- Upgrade for more load capacity possible. Increases current output to 4.8 A
- Incl. power cable
-
Status indicator By LED
Generate datasheet
Charging time (in h) for 460 Wh battery: | 3.7 |
---|---|
Charging time (in h) for 700 Wh battery: | 5.7 |
Charging time (in h) for 920 Wh battery: | 7.1 |
Material: | Plastic |
Output at 48V in amperes: | 3 |
Upgrade option: | Yes |
System: | FIT 2.0 |
System voltage in volts: | 48 |
Input (in Hz) at 230 - 240V: | 50 - 60 |
Material colour: | black |
End-of-charge voltage in V: | 54.6 |
Weight: | 0.77 kg |
Length: | 193.4 mm |
Width: | 94.75 mm |
Height: | 57.2 mm |
Scope of delivery: | 1x FIT Standard Charger, includes power cable |
- Please read all of the safety instructions and regulations. Non-compliance with the safety instructions and regulations may lead to electric shock, fire and/or severe injuries.
- According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, chargers that are no longer usable have to be collected separately and recycled in an environmentally sound way.
- Keep the charger away from rain or moisture. If water enters the charger, there is a risk of electric shock.
- Les équipements de classe de protection II ont une isolation renforcée ou double entre le circuit de courant du secteur et la tension de sortie ou le boîtier métallique (VDE 0100 partie 410, 412.1) et ne sont généralement pas raccordés au conducteur de protection. Cette mesure de protection est également appelée isolation de protection II (séparation électronique sûre)
- Ne remplace pas de fiches, car cela pourrait provoquer un incendie ou une électrocution.